American Pinball Support


Houdini Support Documents

Service Manual

Service Bulletins

FAQ

  • What is the intended playfield pitch for Houdini?

    Designer Joe Balcer likes to see the playfield pitch at 6 degrees, that is obtained by having the leg levelers all the way up (no threads showing between the bottom of the leg and the foot)

  • What is the fuse rating for the fuses on the coil driver boards?

    There are 4 fuses, the fuses for the Brown, Red and Blue lines are 6.3 ASB. The fuse for the Black line is 4 ASB.

  • What transistor do you use on the coil driver boards?

    It is an IRL540N, N channel FET.

  • My Scoop isn’t working right, it takes several attempts to eject the ball.

    Download the Scoop Adjustment doc from our website under Support/Resources and perform the adjustments.

  • I am unable to hit all 3 targets with the skill shot.

    Download the Service Bulletin #3 from our website under Support/Resources and perform the adjustments.

  • How many pinballs are in Houdini?

    Houdini uses 6 pinballs.

  • How do I update Houdini to the latest code?

    First you need a USB stick of at least 4 Gig, Formatted as FAT32. Download the game package from the website, copy onto the USB drive (make sure the package name doesn’t change) Plug into the game with power on and follow the onscreen directions.

  • How do I create a Custom Message on my game?

    Create a PNG image, 1366x768 with whatever you want on it. Name it custom_message.png and put that on a USB stick (with no game code), insert that into the USB extension cable, after several seconds you will get the screen with green type that says something like ‘audits copied . . .’ and to power cycle. After you power cycle, go into settings->standard and set ‘Custom Message’ to ‘On’.

  • Electrical

    Oktoberfest Support Documents

    Service Manual

    Service Bulletins

    FAQ

  • What is the bill acceptor voltage on Oktoberfest?

    12 Volts. With standard size bill holder cassette.

  • How do I create a Custom Message on my game?

    Create a PNG image, 1366x768 with whatever you want on it. Name it custom_message.png and put that on a USB stick (with no game code), insert that into the USB extension cable, after several seconds you will get the screen with green type that says something like ‘audits copied . . .’ and to power cycle. After you power cycle, go into settings->standard and set ‘Custom Message’ to ‘On’.

  • Electrical

    We've got you covered

    WHERE THE MAGIC HAPPENS

    American Pinball Inc.
    1448 Yorkshire Dr
    Streamwood, IL 60107
    (847) 893-6800
    info@american-pinball.com
    american-pinball.com

    Oktoberfest - Available Now!

    Contact one of our local distributors to place an order.